Best choice
5 years warranty
Item number:
WINTER922027
Bicycle load system with Cardiax ECG
A CARDIAX terheléses laboratórium a terheléses teszteket teljesen automatizálja. A számítógép az előre beállított terhelési program szerint vezérli a terheléses eszközt (kerékpár vagy futószalag). A terhelési programban megadhatók a terhelési fázisok időtartama, a kezdő terhelés, a fázisonkénti terhelés emelés, valamint a terhelés megszakításának feltételei. Ha az ergométer automata vérnyomásmérővel is fel van szerelve, a CARDIAX rendszer méri a vérnyomást és a mért értékeket eltárolja. A rendszer folyamatosan rögzíti a teljes terheléses EKG-t. A kiértékelés mentközben, azonnal megtörténik, így a medián görbék és az ST trendek már a vizsgálat közben megfigyelhetők. A vizsgálat végén az eredményekből záróprotokoll készül. Az eredmények grafikus formában is megtekinthetők. Grafikon ábrázolja a szívfrekvenciát, a vérnyomást és a terhelést az idő függvényében. Másik grafikonokon az ST amplitudók és a mediánok változása követhető (ST trend és QRS trend). A program kiértékeli a teljesítőképességet a maximális és szubmaximális tartományban.
A diagnosztikai rendszer megbízhatóságát szakértők statisztikai elemzései bizonyítják.
In stock
Stocks
Winterthur Medical webshop warehouse - W00
In stock
Related products
Details
Contents of the package:
1 Cardiax USB and accessories
1 Cardiax USB and USB USB accessories and 1 Cardiax USB and USB accessories
1 Sanabike 500 bike and accessories
Includes installation, commissioning, free delivery and training
The CARDIAX load laboratory fully automates the load tests. The computer controls the load device (bicycle or treadmill) according to a pre-set load program. The load program allows you to define the duration of the load phases, the initial load, the load increase per phase and the conditions for interrupting the load. If the ergometer is also equipped with an automatic blood pressure monitor, the CARDIAX system measures the blood pressure and stores the measured values. The system continuously records a complete ECG during exercise. The evaluation is done instantaneously, so that the median curves and ST trends can be observed during the test. At the end of the test, the results are recorded in a final protocol. The results can also be viewed graphically. A graph plots heart rate, blood pressure and workload versus time. Other graphs show the variation of ST amplitudes and medians (ST trend and QRS trend). The program evaluates the performance in the maximum and sub-maximum range.
Main features:
- ECG on load, automatic control of ergometers
- full 12-channel curve storage during exercise, rhythm analysis, event counting
- ECG ruler, measurements using movable markers on the curve
- two and three dimensional representation of the ECG curve, trends
- Frank's vector ECG
- Clear management and storage of large amounts of ECG and patient data
- sorting and sorting of data according to different criteria
- continuous saving of any length of the ECG curve
- connectivity to hospital IT systems (HL7, SCP, DICOM, GDT, etc.)
- operation in a local network, with the possibility of several users working simultaneously in a shared database installed on the server (option)
- Remote monitoring of ECG monitoring (TCP/IP). This function allows, for example, a doctor to monitor the stress test from another room on his own monitor.
- clear, user-friendly interface
- editing and storage of patient data
- connectivity to GP software
- diagnostic module suitable for adults and children
- fast and easy transmission of ECG recordings via the Internet
The load system features:
Sampling in 12 standard + 3 Frank leads. From the Frank leads 2 and 3 dimensional vector ECG can be drawn.
The ECG signal is displayed on the computer screen, so the curve can be observed without the use of paper.
- Cardiax's database management system can simultaneously record millions of patient records and 1000 ECG recordings per person, patient charts and findings are easily managed. In a local network, the database installed on the server can be used by multiple workstations simultaneously.
- The software also supports the physician's work with automatic evaluation and diagnosis.
- Old and new stored ECG recordings can be compared
- The Cardiax system provides the services of a stress ECG laboratory, extended with the necessary tools. It automatically controls the treadmill used for the exercise. Records ECGs on 12 channels throughout the entire test. By connecting an automatic blood pressure monitor, blood pressure measurements are pre-programmed and the measured values are automatically transferred to the program.
- With built-in text editor, other data and notes can be stored and printed.
- ECG findings can be printed on plain paper using any type of printer connected to the computer.
- Stored recordings can be easily sent/received to a specified email address directly from the Cardiax program.
- By installing the Cardiax system on a portable computer (laptop), a portable ECG device is obtained that can fully replace professional conventional ECG devices.
- The Cardiax system can be easily integrated with and called from medical database management systems.
Sanabike 500 bicycle ergometer:
- A German-made bicycle specifically designed for cardiology studies.
- German manufacturer of bicycle ergometers for cardiometry.
- Adjustable height for patients 140-210 cm tall.
- Display: 5" TFT, 1280 x 720 pixels
- Operating mechanism: almost silent and maintenance-free unit with Poly-V belt (no chain included)
- 360° rotatable handlebar grip
- Braking: computer-controlled eddy-current track brake with sustained torque
- Rotation speed: 30 - 130 rpm
- Time interval: 1-99 min
- Ergometer weight: 46 kg
- Maximum load capacity: 160 kg
Please ask for a quotation if you would like to add any of these options to your system:
It is also possible to install a local network option for the system if you wish to perform tests from multiple computers/notebooks on a network.
It is also possible to add more load devices to this system (treadmill or bicycle).
Option wifi system for wireless connection.
Option of a blood pressure module
Option to add a spirometry device.
We can also assist in the purchase of a computer device.
1 Cardiax USB and accessories
1 Cardiax USB and USB USB accessories and 1 Cardiax USB and USB accessories
1 Sanabike 500 bike and accessories
Includes installation, commissioning, free delivery and training
The CARDIAX load laboratory fully automates the load tests. The computer controls the load device (bicycle or treadmill) according to a pre-set load program. The load program allows you to define the duration of the load phases, the initial load, the load increase per phase and the conditions for interrupting the load. If the ergometer is also equipped with an automatic blood pressure monitor, the CARDIAX system measures the blood pressure and stores the measured values. The system continuously records a complete ECG during exercise. The evaluation is done instantaneously, so that the median curves and ST trends can be observed during the test. At the end of the test, the results are recorded in a final protocol. The results can also be viewed graphically. A graph plots heart rate, blood pressure and workload versus time. Other graphs show the variation of ST amplitudes and medians (ST trend and QRS trend). The program evaluates the performance in the maximum and sub-maximum range.
Main features:
- ECG on load, automatic control of ergometers
- full 12-channel curve storage during exercise, rhythm analysis, event counting
- ECG ruler, measurements using movable markers on the curve
- two and three dimensional representation of the ECG curve, trends
- Frank's vector ECG
- Clear management and storage of large amounts of ECG and patient data
- sorting and sorting of data according to different criteria
- continuous saving of any length of the ECG curve
- connectivity to hospital IT systems (HL7, SCP, DICOM, GDT, etc.)
- operation in a local network, with the possibility of several users working simultaneously in a shared database installed on the server (option)
- Remote monitoring of ECG monitoring (TCP/IP). This function allows, for example, a doctor to monitor the stress test from another room on his own monitor.
- clear, user-friendly interface
- editing and storage of patient data
- connectivity to GP software
- diagnostic module suitable for adults and children
- fast and easy transmission of ECG recordings via the Internet
The load system features:
Sampling in 12 standard + 3 Frank leads. From the Frank leads 2 and 3 dimensional vector ECG can be drawn.
The ECG signal is displayed on the computer screen, so the curve can be observed without the use of paper.
- Cardiax's database management system can simultaneously record millions of patient records and 1000 ECG recordings per person, patient charts and findings are easily managed. In a local network, the database installed on the server can be used by multiple workstations simultaneously.
- The software also supports the physician's work with automatic evaluation and diagnosis.
- Old and new stored ECG recordings can be compared
- The Cardiax system provides the services of a stress ECG laboratory, extended with the necessary tools. It automatically controls the treadmill used for the exercise. Records ECGs on 12 channels throughout the entire test. By connecting an automatic blood pressure monitor, blood pressure measurements are pre-programmed and the measured values are automatically transferred to the program.
- With built-in text editor, other data and notes can be stored and printed.
- ECG findings can be printed on plain paper using any type of printer connected to the computer.
- Stored recordings can be easily sent/received to a specified email address directly from the Cardiax program.
- By installing the Cardiax system on a portable computer (laptop), a portable ECG device is obtained that can fully replace professional conventional ECG devices.
- The Cardiax system can be easily integrated with and called from medical database management systems.
Sanabike 500 bicycle ergometer:
- A German-made bicycle specifically designed for cardiology studies.
- German manufacturer of bicycle ergometers for cardiometry.
- Adjustable height for patients 140-210 cm tall.
- Display: 5" TFT, 1280 x 720 pixels
- Operating mechanism: almost silent and maintenance-free unit with Poly-V belt (no chain included)
- 360° rotatable handlebar grip
- Braking: computer-controlled eddy-current track brake with sustained torque
- Rotation speed: 30 - 130 rpm
- Time interval: 1-99 min
- Ergometer weight: 46 kg
- Maximum load capacity: 160 kg
Please ask for a quotation if you would like to add any of these options to your system:
It is also possible to install a local network option for the system if you wish to perform tests from multiple computers/notebooks on a network.
It is also possible to add more load devices to this system (treadmill or bicycle).
Option wifi system for wireless connection.
Option of a blood pressure module
Option to add a spirometry device.
We can also assist in the purchase of a computer device.
Package offers
Reviews
Be the first to write a review!
